Demulsifier technical term
1. Core production/volume units--Demulsifier fast acting.
①BOPD(Barrels of Oil Per Day)--1 BOPD = 158.987 liters/day ≈ 0.159 cubic meters/day
The core daily production metric for oil fields, commonly used by clients to assess demulsifier or demulsifier fast acting requirements (e.g., a 10,000 BOPD oil field requires a demulsifier or demulsifier fast acting matching its tonnage).
②MBOPD(Thousand BOPD)--1 MBOPD = 1,000 BOPD ≈ 159 cubic meters per day
Production specifications for medium-to-large oil fields.
③MMBOPD(Million BOPD)--1 MMBOPD = 1,000,000 BOPD ≈ 159,000 cubic meters per day
Total output of oil-producing countries or major oil companies (e.g., OPEC's report "Global Production: 100 MMBOPD") used to assess regional market size.
④BOEPD(Barrels of Oil Equivalent Per Day)--1 BOEPD = 1 BOPD (crude oil) = 6,000 cubic feet of natural gas
Hybrid energy output statistics (This unit may be used to indicate total capacity when customers engage in oil-gas co-production, indirectly affecting the demand for demulsifier or demulsifier fast acting and natural gas treatment agents).
⑤BBI(Barrel)--1 barrel = 42 US gallons = 158.987 liters
For core trade contract units (e.g., "purchase 100,000 bbl crude oil"), the demulsifier or demulsifier fast acting procurement quantity is typically calculated based on "demulsifier or demulsifier fast acting consumption per barrel of crude oil".
2. Pressure Unit (Core Technical Parameter Affecting Emulsifier Selection)
①psi(Pounds Per Square Inch)--1 psi ≈ 6.895 kPa ≈ 0.069 bar
Wellhead pressure and pipeline operating pressure (e.g., if the customer states "OP is 5,000 psi," the demulsifier(demulsifier fast acting) model for high-pressure conditions must be selected).
②Bar(Bar)--1 bar = 100 kPa ≈ 14.5 psi
Commonly used by European (e.g., European oilfield operating pressure of 35 bar, requiring rapid conversion to psi for chemical parameter matching).
③KPa(Kilopascal)--1 kPa = 0.145 psi ≈ 0.01 bar
Low-voltage equipment/laboratory parameters (e.g., emulsifier test report: "separation pressure 200 kPa").
④MPa(Megapascal)--1 MPa = 10 bar = 145 psi
High-pressure Oilfield/Deep-sea Extraction (e.g., the wellhead pressure of 20 MPa in deep-sea oilfields in the Middle East, requiring high-performance high-pressure demulsifier).
3. Volume/Weight Units (Trade Settlement, Pharmaceutical Procurement Quantity)
①m³(Cubic Meter)--1 m³ ≈ 6.2898 barrels (crude oil)
For trade settlements in metric units (e.g., Russia) (e.g., "emulsifier procurement 50 m³/month"), convert to ton-level pricing.
②gal(Gallon)--1 US gallon = 3.785 liters; 1 British gallon = 4.546 liters
Some clients in the Middle East use US gallons to describe dosage amounts (e.g., "0.5 gal of demulsifier per barrel of crude oil").
③Ton(ton or metric ton)--1 ton = 1,000 kg ≈ 6.2898 barrels (crude oil, calculated based on a density of 0.85)
The core unit for demulsifier(Demulsifier additive for crude oil) procurement (e.g., "100 t demulsifier order") must determine the matching quantity based on crude oil density conversion and BOPD.
④lb(Pound)--1 lb = 0.4536 kg
Dosage descriptions for pharmaceuticals in U.S. manufacturing (e.g., "add 50 lb of demulsifier per 1,000 barrels of crude oil") should be converted to kilograms per ton for cost calculation purposes.
4. Flow Rate/Unit (Production Process + Dose Injection)
①GPM (Gallons Per Minute)--1 GPM ≈ 3.785 L/min
The flow rate of the injection pump (e.g., "emulsifier injection rate 10 GPM") is used to calculate daily/monthly chemical consumption.
②LPM(Liters Per Minute)--1 LPM = 0.264 GPM
Metric units of equipment (e.g., LPM for injection rate in Russian oil fields).
③m³/h(Cubic Meters Per Hour) --1 m³/h ≈ 4.403 GPM
Large pipeline oil/chemical delivery rate (e.g., "crude oil delivery rate 100 m³/h", matching demulsifier (demulsifier additive for crude oil) injection ratio)
5. Other Core Support Units (Highly Focused in Technical Documentation)
①API(American Petroleum Institute Gravity)--API = 141.5 / (Crude oil density) -131.5
Crude oil density specifications (e.g., "API 35" denotes light crude oil, and the emulsifier selection must correspond to the oil's density).
②ppm(Parts Per Million)--1 ppm = 1 mg/L = 1 g/m³
The requirement for chemical concentration (e.g., "the concentration of demulsifier in crude oil must reach 50 ppm") directly affects the calculation of injection volume.
③cp(Centipoise)--1 cp = 1 mPa·s
Crude oil/agent viscosity (e.g., "100 cp at 50°C for crude oil viscosity") requires selection of a low-viscosity demulsifier for easy injection.
④°F / °C(Fahrenheit / Celsius)--°C = (°F - 32)×5/9
Temperature parameters (commonly used in the Middle East/USA in °F, e.g., "crude oil separation temperature 180°F" should be converted to °C to match the temperature tolerance of the chemical agent).